GE IC697CMM711 - Image 1
GE IC697CMM711 - Image 2
Click to enlarge
GE IC697CMM711
GE IC697CMM711 - Image 2
GE IC697BEM721
GE IC697BEM721
Back to products
GE IC697CMM742
GE IC697CMM742

GE IC697CMM711

  • Product Introduction: The IC697CMM711 is a single-slot communications coprocessor module for GE Series 90-70 PLC systems, equipped with a 12 MHz 80C186 microprocessor and dual configurable RS-232/RS-422/RS-485 serial ports (25-pin D-shell female connectors). It supports CCM (master/slave/peer), SNP/SNP‑X (master/slave), and Modbus RTU (slave only) protocols, enabling multi‑drop network data exchange between the PLC and other industrial devices, with software configuration eliminating manual jumpers/switches.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: Single‑slot communications coprocessor module for Series 90-70 baseplates
  • Microprocessor: 12 MHz 80C186
Category:
Description
  • Serial Ports: 2 configurable RS‑232/RS‑422/RS‑485 ports, 25‑pin D‑shell female connectors
  • Supported Protocols: CCM (master, slave, peer); SNP/SNP‑X (master, slave); Modbus RTU (slave only)
  • Port Configurations: CCM/CCM, CCM/RTU, RTU/CCM, RTU/RTU, SNP/SNP, SNP/CCM, CCM/SNP, SNP/RTU, RTU/SNP
  • Backplane Power: 5 VDC, 700 mA (3.5 W)
  • LED Indicators: Power OK, Module Fault, Communication Activity
  • Reset: Pushbutton for manual reset
  • Configuration: Software‑based (no jumpers or DIP switches)
  • Physical Dimensions: 30 mm × 140 mm × 160 mm (1.18 in × 5.51 in × 6.30 in)
  • Weight: 0.5 kg (1.10 lbs)
  • Operating Temperature: 0°C to 60°C
  • Storage Temperature: -40°C to 85°C
  • Relative Humidity: 5% to 95% (non‑condensing)
  • Certifications: CE, UL 61010‑1, CSA C22.2 No. 61010‑1, EU RoHS compliant
  • Multi‑Protocol Support: Runs CCM, SNP/SNP‑X, and Modbus RTU protocols to integrate with diverse industrial networks
  • Dual Port Flexibility: Each port independently configurable for different protocols and physical layers (RS‑232/RS‑422/RS‑485)
  • Software Configuration: No manual hardware setup reduces human error and speeds up deployment
  • Peer‑to‑Peer Communication: CCM peer mode enables direct data exchange between PLCs without a master controller
  • SNP Native Protocol: SNP/SNP‑X support ensures seamless integration with other GE IC69* PLCs
  • Modbus Compatibility: RTU slave mode connects to Modbus master devices in SCADA and HMI systems
  • Process Automation: Links Series 90-70 PLCs to SCADA systems, remote I/O, and DCS in oil/gas, chemical, and water treatment plants
  • Manufacturing Control: Enables data sharing between PLCs, HMIs, and variable speed drives in automotive, packaging, and material handling lines
  • Remote Monitoring: Supports Modbus RTU for data collection by master devices in distributed industrial sites
  • Peer‑to‑Peer Networking: CCM peer mode facilitates direct PLC‑to‑PLC communication for coordinated control in complex manufacturing cells
  • Legacy System Integration: Bridges Series 90-70 PLCs with older Modbus/CCM/SNP devices during plant upgrades
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE IC697CMM711”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE 239-RTD-AN Motor Protection Relay with RTD Inputs

unctional Features

  1. Advanced Protection Algorithms
    • 15 Thermal Curves: Configurable overload curves to match motor characteristics .
    • RTD Monitoring: Direct integration with PT100/PT1000 sensors for real-time winding temperature tracking (±0.5% accuracy) .
  2. Operational Flexibility
    • Programmable Outputs: Customizable relay actions for alarms, trips, or process signals (e.g., motor load percentage) .
    • Test Mode: Simulates faults without activating outputs for system validation .
Read more
Quick view

GE 469-P5-HI-A20-E-H Motor Management Relay

Technical Specifications:
  • Voltage Rating: Designed to operate within standard industrial control voltages, typically compatible with 125 VDC or 250 VDC control systems.
  • Current Input: Accepts standard current transformer (CT) inputs such as 1 A or 5 A, enabling integration with various generator monitoring setups.
  • Communication Interfaces: Equipped with multiple communication options including Modbus RTU over RS-485, and optionally Ethernet for integration into SCADA and distributed control systems.
Read more
Quick view

GE 516TX 336A4940DNP516TX — Industrial Ethernet Switch (N-Tron 516TX Series)

The GE 516TX 336A4940DNP516TX (also referred to as the N-TRON 516TX-A Industrial Ethernet Switch) is a high-reliability networking device designed for mission-critical industrial environments. Part of GE's N-TRON series, this switch delivers robust connectivity and advanced management features for industrial automation systems.
Read more
Quick view

GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems

Procurement Guidance

  1. Compatibility Notes
    • Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g., -FJ) denote specific variants .
    • Backward-compatible with legacy GE PLCs (e.g., Series 90-70) .
  2. Critical Accessories
    • IC698ACC701 Lithium Battery: Mandatory for RAM backup .
    • VME I/O Modules: e.g., DS200 series for signal distribution .
  3. Avoid Mismatched Claims
    • "512 MB RAM" → Refers to GE IC698CPE030 model .
    • "3AC 400V Input" → Applies to power modules, not CPU logic .
  4. Warranty & Authenticity
    • 12-month warranty for factory-sealed units; verify holographic seals .
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants .
Read more
Quick view

GE IC754CSX06CTD QuickPanel+ Operator Interface

Technical Specifications:
  • The module is equipped with a powerful multi-core processor enabling efficient execution of complex control algorithms and real-time data processing.
  • It features 16 serial communication ports, providing extensive connectivity for interfacing with a wide range of field devices, sensors, and actuators.
  • Memory architecture includes onboard DDR RAM and non-volatile storage to support operating system execution, application hosting, and data logging.
  • Communication interfaces include Gigabit Ethernet for high-speed network connectivity, USB ports for peripheral expansion, and multiple serial standards such as RS-232, RS-422, and RS-485.
  • Designed for industrial use, the module operates within an extended temperature range and meets electromagnetic compatibility and shock/vibration resistance standards.
Read more
Quick view

GE IS200VAICH1D – Analog Input Module for Mark VI Systems

Technical Specifications:

  • Function: Analog Input Card
  • Compatibility: Designed to work with Mark VI Speedtronic turbine control systems
  • Signal Conversion: Converts various analog signals (e.g., 4-20mA, voltage) to digital format for processing
  • Channels: Typically supports multiple input channels depending on configuration
  • Power Supply: Operates within specified voltage ranges suitable for industrial environments
  • Environmental Conditions: Rated for operation under certain temperature and humidity conditions
Read more
Quick view

GE IS215UCVEM08 Mark VI Controller Processor Module

Technical Specifications:

  • Module Type: The IS215UCVEM08 is a Control Processing Module designed to execute control logic and communicate with field devices and other system components.
  • Processor: Equipped with a high-performance processor capable of handling complex control algorithms and real-time data processing.
  • Memory: Comes with onboard memory sufficient for storing configuration files, application code, and operational data. It supports both volatile and non-volatile storage options.
  • Communication Interfaces: Supports various communication protocols including Ethernet, ControlNet, and others, facilitating integration with different parts of the control system and external devices.
  • I/O Capabilities: Designed to interface with input/output modules for collecting data from sensors and sending commands to actuators. It can manage digital and analog signals.
Read more
Quick view

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

Technical Specifications:

  • Processor: Equipped with a powerful processor that supports high-speed operation suitable for compute-intensive tasks. Depending on the specific configuration, it can feature processors like PowerPC or Intel architectures.
  • Memory: Offers significant RAM capacity, essential for running complex applications and multitasking efficiently. It also includes options for non-volatile memory for data retention without power.
  • Storage: Supports various storage options such as CompactFlash or SSD for storing operating systems, applications, and data.
  • I/O Interfaces: Comes with multiple I/O interfaces including USB ports, serial ports, Ethernet, and digital I/O, allowing connectivity to a wide range of peripherals and networks.
Read more
Quick view