GE IC695ETM001CA-ER - Image 1
GE IC695ETM001CA-ER - Image 2
Click to enlarge
GE IC695ETM001CA-ER
GE IC695ETM001CA-ER - Image 2
GE IC695ETM001
GE IC695ETM001
Back to products
GE IC695NIU001
GE IC695NIU001

GE IC695ETM001CA-ER

  • Product Introduction: The IC695ETM001CA-ER is an enhanced dual-port Ethernet interface module for GE PACSystems RX3i controllers, offering advanced network redundancy, enhanced security, and extended temperature range, fully compatible with RX3i hot standby redundant systems (IC695RMX128) to ensure continuous network connectivity in mission-critical applications.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: Single-slot Ethernet interface module for RX3i universal backplane
Category:
Description
  • Processor: 200 MHz Ethernet processor
  • Ethernet Ports: 2×shielded RJ-45 10BaseT/100BaseTX ports, auto-negotiation, auto-sensing speed, and crossover detection
  • Network Interface: One MAC address, one IP address; embedded switch for port connection
  • Station Manager Port: 9-pin female D-connector (RS-232) for local configuration and monitoring
  • Supported Protocols: TCP/IP, UDP, SRTP, Modbus TCP (server/client), EGD, SNTP, DNP3 over IP (enhanced), SSL/TLS (security enhanced)
  • Power Requirements: +3.3 VDC at 0.84 A, +5.0 VDC at 0.614 A; typical power consumption 4.0 W
  • Operating Temperature: -25°C to 70°C (extended range)
  • Storage Temperature: -40°C to 85°C
  • Relative Humidity: 5% to 95% (non-condensing)
  • Dimensions: 34 mm×140 mm×141 mm (1.34 in×5.51 in×5.55 in)
  • Weight: 0.38 kg (0.84 lbs)
  • Redundancy Support: Fully compatible with RX3i redundancy modules (IC695RMX128); supports network redundancy with automatic failover
  • Firmware Upgrade: Field-upgradable via WinLoader utility from RX3i CPU
  • Security Features: SSL/TLS encryption, role-based access control (RBAC), secure boot, and IP filtering (enhanced)
  • EGD Functionality: Supports up to 256 EGD exchanges, 1024 data items per exchange, and EGD command set for memory read/write
  • Modbus TCP Performance: Up to 100 concurrent Modbus TCP connections, 10,000 read/write requests per second
  • SRTP Channels: Up to 32 SRTP channels for programming, data transfer, and remote diagnostics
  • LED Indicators: Front-panel LEDs for power, network link, activity, redundancy status, and module health
  • Restart Button: Recessed Ethernet Restart pushbutton for manual module restart
  • Hot-Swappable: Supports hot swapping for maintenance without system shutdown
  • Certifications: CE, UL 61010-1, CSA C22.2 No. 61010-1, ATEX, IECEx; EU RoHS compliant
  • Mission-Critical Redundant Networks: Used in power generation, oil and gas, and chemical processing to maintain network connectivity during CPU or network failures
  • Process Control and SCADA Integration: Enables secure data exchange between RX3i controllers, SCADA systems, and HMI with enhanced security protocols
  • Industrial Automation: Facilitates machine-to-machine communication between RX3i, Series 90-30, and VersaMax controllers in manufacturing lines
  • Remote Monitoring and Diagnostics: Supports secure remote access for programming, firmware upgrades, and diagnostics via encrypted channels
  • Infrastructure Management: Deployed in water/wastewater treatment plants and transportation systems for reliable network communication and data collection
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE IC695ETM001CA-ER”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE 516TX 336A4940DNP516TX — Industrial Ethernet Switch (N-Tron 516TX Series)

The GE 516TX 336A4940DNP516TX (also referred to as the N-TRON 516TX-A Industrial Ethernet Switch) is a high-reliability networking device designed for mission-critical industrial environments. Part of GE's N-TRON series, this switch delivers robust connectivity and advanced management features for industrial automation systems.
Read more
Quick view

GE DS200FCGDH1B

Procurement Guidance

  • Validated Models: DS200FCGDH1B (base) ; 3BHB005243R0106 (redundant variant for Mark VI).
  • Critical Accessories:
    • DS200DSPC (VME processor) for signal generation .
    • GE Mark V/VIturbine control racks for integration .
  • Exclude Mismatched Claims:
    • Circuit breaker specs → Refer to GE DS200 series breakers.
    • AC input modules → Use GE UFC760BE42.
  • Warranty: 12 months for factory-sealed units .
Read more
Quick view

GE IC698CMX016-ED VMIVME-5567-000 350-005567-000 E

Technical Specifications

  • IC698CMX016-ED Control Memory Exchange Module
    • Memory: 16 MB SDRAM with parity for reflective memory data storage .
    • Communication:
      • Fiber Optic Interface: 2.12 Gbaud transmission rate over multimode fiber (LC connectors), supporting up to 300 meters .
      • Network Nodes: Up to 256 nodes in a daisy-chained loop configuration .
      • Packet Sizes: Dynamic 4–64 bytes, achieving 43–174 MB/s transfer rates .
Read more
Quick view

GE IC698CRE040-HN-2

Technical Specifications:
  • The IC698CRE040-HN-2 features a powerful processor enabling fast execution of control logic, suitable for demanding real-time applications.
  • It supports a large memory capacity for user programs and data, allowing for sophisticated control strategies and data logging.
  • Provides integrated Ethernet communication ports for connectivity to programming devices, HMIs, SCADA systems, and other controllers, supporting standard protocols such as Modbus TCP/IP and SNMP.
  • Compatible with the entire range of RX3i I/O modules, enabling flexible system expansion and customization to meet specific application needs.
  • Operates within a wide temperature range and is designed to withstand industrial environmental conditions, including electrical noise and vibration.
Read more
Quick view

GE IS215VPROH1BD – Turbine Protection Module

Technical Specifications

  • Hardware Architecture
    • Input Voltage: 125V DC (operational range: 70–145V DC) .
    • Output Voltage: 5V DC (logic supply) and 28V DC (actuation supply) .
    • Sampling Rate: Up to 100 Hz for real-time monitoring of turbine speed, vibration, and other parameters .
Read more
Quick view

GE MRP643486 IS200VSVOH1BDC — VME Servo Control Card

Technical Specifications:

  • Function: Servo Output Board
  • Compatibility: Designed for use with the Mark VI and Mark Vie Speedtronic turbine control systems.
  • Channels: Typically includes multiple channels for controlling different servo mechanisms.
  • Signal Processing: Converts digital control signals from the system into analog outputs to drive servos.
  • Power Supply: Operates within specified voltage ranges suitable for industrial environments.
  • Environmental Conditions: Rated for operation under specific temperature and humidity conditions, ensuring reliability in demanding settings.
Read more
Quick view

GE RS-FS-9001 362A1052P004 – Complete Technical Profile

Technical Specifications:
  • Designed as part of the Mark VI or Mark Vie control system family, which are widely recognized for their application in gas and steam turbine controls.
  • Supports various input/output configurations tailored to handle signals from sensors, actuators, and other field devices integral to turbine operations.
  • Capable of operating within specific voltage ranges and environmental conditions suitable for industrial settings.
  • Equipped with robust communication capabilities that facilitate integration with broader plant networks and SCADA systems.
Read more
Quick view

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

Technical Specifications:

  • Processor: Equipped with a powerful processor that supports high-speed operation suitable for compute-intensive tasks. Depending on the specific configuration, it can feature processors like PowerPC or Intel architectures.
  • Memory: Offers significant RAM capacity, essential for running complex applications and multitasking efficiently. It also includes options for non-volatile memory for data retention without power.
  • Storage: Supports various storage options such as CompactFlash or SSD for storing operating systems, applications, and data.
  • I/O Interfaces: Comes with multiple I/O interfaces including USB ports, serial ports, Ethernet, and digital I/O, allowing connectivity to a wide range of peripherals and networks.
Read more
Quick view