Triconex CM3201 Communication Module

• Processor and Memory Parameters
  • It is equipped with a 32-bit Motorola MPC860 processor running at a clock speed of 50 MHz, which supports real-time operating systems and efficiently executes complex control logic.
  • It is configured with 16 MB of non - battery backed DRAM, 32 KB of battery backed SRAM, and 6 MB of flash PROM, which can store a large number of control programs and real-time operation data stably.
• Communication Parameters
  • It uses the TriBus communication bus with a data transmission rate of 25 Mbps. The bus is equipped with 32-bit CRC protection and 32-bit DMA, and the communication part is fully isolated to ensure secure and stable data transmission.
  • It supports multiple communication protocols such as Modbus, Modbus TCP/IP, and Ethernet/IP, and is also compatible with communication interfaces like RS - 232/422/485 to achieve seamless connection with various industrial devices and systems.

• Communication Port Parameters
  • It is equipped with three configurable RS - 232/485 serial ports and two Ethernet ports. Some versions can be configured with four serial ports, with a total data transmission rate of 460.8 kilobits per second for all serial ports.
  • The two Ethernet ports include 802.3 copper Ethernet ports and fiber - optic Ethernet ports in different models, with the Ethernet transmission speed reaching 100Mbps.
  • The first serial port can support Modbus or Trimble GPS interface, and the fourth serial port can be configured as Modbus or Tristation interface.
• Power and Electrical Parameters
  • The nominal input voltage is 24V DC, and the working voltage range is 19.2V DC to 30V DC, which can tolerate 5% AC ripple.
  • The maximum power interruption time allowed from the nominal voltage is 1 millisecond, the minimum repetition rate of power interruption is 1 second, and the maximum logic power consumption of the module is 8 watts.

• • Electrical Parameters
    • The nominal output voltage is 120 VDC, with a voltage range of 90 - 150 VDC and a maximum withstand voltage of 160 VDC. The typical voltage drop of the module is less than 1.5 V, and the power module load is less than 10 watts.
    • Each output point has a maximum current of 0.8 A, a surge current of 4 A within 10 milliseconds, a minimum required load current of 30 mA, and a maximum load leakage current of 4 mA.
    • The field terminal is equipped with a 1 A fast - acting fuse, and the point isolation voltage can reach 1500 VDC / 2500 VDC, which can effectively isolate electrical interference.
  • Physical and Indicator Parameters
    • The module weighs 5000 grams, and its shell adopts a steel - blue robust structure, which can adapt to the installation and use of various industrial control cabinets.
    • It is equipped with multiple diagnostic indicators, including pass, fault, active and power indicators for overall module status, as well as an independent load indicator for each output point, which can directly reflect the working state of the module and each output point.

Technical Specifications:

• Type: Typically serves as an interface or communication module within the Tricon system.
• Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
• Power Supply: Operates within specified voltage ranges suitable for industrial environments.
• Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
• Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.