Triconex 4119 - Image 1
Click to enlarge
Triconex 4104C
Triconex 4104C
Back to products
Triconex 4200 Digital Input Module
Triconex 4200 Digital Input Module

Triconex 4119

Technical Specifications:

  • 4119A Redundancy Power Module:
    • Function: Provides redundant power supply for SIS controllers and I/O stations.
    • Architecture: Adopts Triple Modular Redundancy (TMR) to ensure continuous operation in case of a single-point failure.
    • Compatibility: Easily integrates with existing Triconex systems for seamless expansion and upgrades.
  • Enhanced Intelligent Communication Module (EICM):
    • Communication Interfaces: Supports multiple communication protocols, such as Ethernet, Modbus, and others, for data exchange with other devices or systems.
    • Data Processing: Capable of complex data processing and logical operations to meet various safety control requirements.
    • Configuration: Offers flexible configuration options to adapt to different application needs.
Category:
Description

Functional Characteristics:

  • High Reliability: The TMR architecture ensures that the system can continue operating normally even if one module fails, enhancing system safety and availability.
  • Fault Tolerance: Equipped with advanced self-diagnosis and fault detection functions, it can monitor module status in real-time, provide fault alarms, and offer detailed fault information for quick troubleshooting.
  • Real-time Performance: With fast response capabilities, it can monitor and process various industrial processes in real-time, ensuring high-performance operation.
  • Scalability: The modular design facilitates system expansion and upgrades, meeting changing production demands.
  • Compatibility: Compatible with other Triconex modules and systems, enabling easy integration into existing safety systems.

Application Scenarios:
The Triconex 4119 series is widely used in various industrial sectors where high safety and reliability are essential, including:

  • Petroleum and Natural Gas: Utilized in oil and gas extraction, transportation, and processing for safety control and monitoring.
  • Chemical Industry: Employed in chemical production processes for safety monitoring and control to prevent accidents and ensure environmental compliance.
  • Power Generation: Used in power generation and distribution systems for safety protection and emergency shutdown operations.
  • Manufacturing: Applied in manufacturing processes for safety control and monitoring to enhance production efficiency and product quality.
  • Water Treatment: Controls water treatment and wastewater treatment equipment to ensure water quality and environmental compliance.
  • High-cycle-rate Applications: Particularly suitable for applications requiring precise maintenance of high cycle rates, such as automotive production, periodic operations, and food production.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Triconex 4119”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Triconex 3009 Enhanced Main Processor (UMP) Module

Technical Specifications
  • Processor and Memory Parameters
    • It is equipped with an Intel Core i7 - 4790 or PowerPC 604e processor, with a main frequency of up to 1.3 GHz, which can efficiently support the operation of complex control algorithms and large - scale system data processing.
    • It supports a maximum of 16GB DDR3L RAM, and is configured with a 2GB SSD for storage, which can stably store a large number of control programs, configuration parameters and real-time operation data of the system.
  • Power and Environmental Parameters
    • The input voltage is 24V DC, the output voltage is 5V DC, and the maximum power consumption is 22W, which meets the power supply standards of industrial control systems.
    • The operating temperature range is -40°C to +70°C, and the storage temperature range is -40°C to +85°C. It can adapt to the extreme temperature changes of most industrial sites.
    • It can work normally in an environment with a humidity of 5% to 95% non-condensing, has an anti - shock capacity of 30g (11ms) and an anti - vibration capacity of 5g (10 - 150Hz).
Read more
Quick view

Triconex 3201 Communication Module

Technical Specifications:
  • System Architecture: The 3201 model is part of a triply redundant architecture, offering fault tolerance and high availability. This triple modular redundancy (TMR) ensures continuous operation even in the event of hardware failures.
  • Processor Capabilities: Equipped with powerful processors capable of executing complex control logic and diagnostics simultaneously across three channels to ensure reliable operation.
  • Memory: Includes sufficient memory for storing application programs, historical data, and system parameters, supporting extensive configuration and logging capabilities.
  • Communication Interfaces: Supports various communication protocols including Modbus, OPC, and proprietary interfaces, enabling seamless integration with distributed control systems (DCS) and other plant networks.
Read more
Quick view

Triconex 3351 Analog Input (AI) Module

Technical Specifications
  • Input and Signal Parameters
    • The analog input version has 32 shared points, with a nominal input current of 4 - 20mA DC and an operating current range of 2 - 22mA DC. It has a 16-bit resolution and an accuracy of ±0.01% within the 1000 - 20000Hz frequency range.
    • The pulse input version has 8 high-frequency input points, a pulse count measurement resolution of 1 microsecond, and an input diagnostic fault range of 0.5% of the full scale. The input change sampling cycle is the longer one between one scan and 210 milliseconds.
    • The module has an input bandwidth of 16Hz, an absolute maximum field voltage of 33V DC, and an absolute maximum reverse field voltage of -0.6V DC.
  • Power and Electrical Parameters
    • The nominal power supply voltage is 24V DC. The minimum isolation between functional and protective earth is 500V DC, and the minimum isolation between functional and functional earth is 800V DC.
    • The module has a source impedance of 180Ω, an input impedance of 250Ω when paired with a baseplate, and a 100Ω I-to-V resistor with a tolerance of ±0.01%.
Read more
Quick view

Triconex 3401 Digital Output Module

Technical Specifications
  • Output and Signal Parameters
    • The nominal output voltage is 24V DC, and the operating voltage range is 15 - 30V DC, with an absolute maximum output voltage of 33V DC and an absolute maximum reverse input voltage of -0.6V DC.
    • In switching mode, the maximum output current is less than 4.8A with self-limiting function, and the typical value is 3A; in carry mode, the minimum output current is more than 0.7A with self-limiting function, and the typical value is 1.5A.
    • The loop-back threshold is 0 - 5V DC for the off state, 6 - 14V DC for the transition state, and 15 - 30V DC for the on state, and the off-state leakage current to the load is less than 1mA.
  • Power and Isolation Parameters
    • The minimum isolation voltage between functional circuit and protective ground is 500V DC, and the minimum isolation voltage between functional circuit and functional logic ground is 800V DC, which can effectively prevent electrical interference from affecting the normal operation of the module.
    • The voltage drop in the on-state is less than 1V DC when the current is 1.5A, which reduces the energy loss during signal transmission and ensures the efficiency of power utilization.
Read more
Quick view

Triconex 3503EN High-Reliability Digital Input Module

Technical Specifications
  • Input and Signal Parameters
    • It supports 24V AC/DC input voltage, with a recommended input voltage range of 20 - 42.5V DC and a maximum allowable voltage of 42.5V AC/DC.
    • It is configured with 32 input channels, which are grouped into commoned units of 8 channels each. The input frequency is 47 - 63Hz for AC 24V and 50Hz for DC 24V, with a millisecond-level response time to capture field signal changes rapidly.
    • The point isolation voltage reaches 1500V DC, which effectively isolates external electromagnetic interference and ensures the accuracy and stability of input signals.
  • Power and Physical Parameters
    • It uses a 24V DC power supply and has a power consumption of less than 5W, which matches the power configuration of most industrial control systems.
    • It is designed for 19-inch rack installation, with dimensions of 150mm in width, 80mm in height and 50mm in depth. Its actual weight is 4 kilograms, and the transport weight is 10.5 kilograms.
Read more
Quick view

Triconex 3504E High-Density Triple Modular Redundancy Digital Input Module

  • Technical Specifications
    • Input and Signal Parameters
      • It is configured with 64 commoned, DC-coupled input channels. It offers software-selectable voltage options of 24 VDC or 48 VDC, adapting to different industrial field requirements.
      • The voltage range for 24 VDC is 15 - 30 VDC with a maximum voltage of 36 VDC; for 48 VDC, the range is 20 - 72 VDC. The turn-on voltage threshold exceeds 15 VDC for 24 VDC and 32 VDC for 48 VDC, while the turn-off threshold is below 6 VDC for 24 VDC and 11 VDC for 48 VDC.
      • The nominal turn-on current is 2 - 3 mA. The input delay is less than 2 ms for 24 VDC and less than 10 ms for 48 VDC, and the minimum point isolation voltage reaches 1500 VDC.
    • Physical and Weight Parameters
      • There are conflicting data on its physical dimensions from different sources, but it is designed for integration into standard Triconex system racks. One source lists its weight as 5000 grams, while another cites approximately 0.5 kilograms, and these discrepancies may stem from differences in whether accessories are included in the weighing.
    • Environmental Parameters
      • It maintains stable operation within an operating temperature range of -40°C to 70°C, which allows it to adapt to extreme temperature conditions in various industrial sites.
      • It has a protection level of IP65, enabling it to resist the impact of dust and water in harsh industrial environments and ensuring long-term reliable operation.
Read more
Quick view

Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module

  • Technical Specifications
    • Electrical and Signal Parameters
      • It is equipped with 16 non-commoned independent output channels, with a nominal output voltage of 24 VDC and a voltage adaptation range of 22 - 45 VDC.
      • Each channel can carry a current of 2A, and the signal response time is less than 1ms, enabling rapid execution of control commands.
      • It adopts optical isolation technology, with a point-to-point isolation voltage of 1500 VDC, which can effectively prevent electrical interference between channels and external circuits.
    • Physical and Weight Parameters
      • Its dimensions are 49cm × 45.3cm × 6.8cm, and it is designed for 19-inch rack mounting, which is consistent with standard industrial control cabinet installation specifications.
      • The weight of the module is 3.65 kg, and its solid structure ensures stability during long-term operation.
    • Environmental Parameters
      • The operating temperature range is -40°C to 85°C, which allows it to adapt to the extreme temperature fluctuations of various outdoor and indoor industrial sites.
      • It can work normally in an environment with a relative humidity of 0% - 95% (non-condensing), resisting the impact of humid air on internal components.
Read more
Quick view

Triconex 3623T 16-Point Triple Modular Redundancy Supervised Digital Output Module

Technical Specifications
    • Electrical Parameters
      • The nominal output voltage is 120 VDC, with a voltage range of 90 - 150 VDC and a maximum withstand voltage of 160 VDC. The typical voltage drop of the module is less than 1.5 V, and the power module load is less than 10 watts.
      • Each output point has a maximum current of 0.8 A, a surge current of 4 A within 10 milliseconds, a minimum required load current of 30 mA, and a maximum load leakage current of 4 mA.
      • The field terminal is equipped with a 1 A fast - acting fuse, and the point isolation voltage can reach 1500 VDC / 2500 VDC, which can effectively isolate electrical interference.
    • Physical and Indicator Parameters
      • The module weighs 5000 grams, and its shell adopts a steel - blue robust structure, which can adapt to the installation and use of various industrial control cabinets.
      • It is equipped with multiple diagnostic indicators, including pass, fault, active and power indicators for overall module status, as well as an independent load indicator for each output point, which can directly reflect the working state of the module and each output point.
Read more
Quick view