Triconex 3623T 16-Point Triple Modular Redundancy Supervised Digital Output Module - Image 1
Click to enlarge
Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module
Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module
Back to products
Triconex 3625 32-Point Triple Modular Redundancy Supervised
Triconex 3625 32-Point Triple Modular Redundancy Supervised

Triconex 3623T 16-Point Triple Modular Redundancy Supervised Digital Output Module

Technical Specifications

    • Electrical Parameters
      • The nominal output voltage is 120 VDC, with a voltage range of 90 – 150 VDC and a maximum withstand voltage of 160 VDC. The typical voltage drop of the module is less than 1.5 V, and the power module load is less than 10 watts.
      • Each output point has a maximum current of 0.8 A, a surge current of 4 A within 10 milliseconds, a minimum required load current of 30 mA, and a maximum load leakage current of 4 mA.
      • The field terminal is equipped with a 1 A fast – acting fuse, and the point isolation voltage can reach 1500 VDC / 2500 VDC, which can effectively isolate electrical interference.
    • Physical and Indicator Parameters
      • The module weighs 5000 grams, and its shell adopts a steel – blue robust structure, which can adapt to the installation and use of various industrial control cabinets.
      • It is equipped with multiple diagnostic indicators, including pass, fault, active and power indicators for overall module status, as well as an independent load indicator for each output point, which can directly reflect the working state of the module and each output point.
Category:
Description
    • Environmental Parameters
      • It has an IP67 environmental protection rating and can operate stably in a wide temperature range of – 40 °C to 85 °C, adapting to harsh industrial environments with large temperature fluctuations and dusty or humid conditions.
  • Functional Features
    • High Fault Tolerance Based on Redundant Design
      • The combination of triple modular redundancy architecture and quadruplicated output switch enables the module to maintain reliable output of signals even if some circuits fail. This design completely avoids system shutdown or misoperation caused by single – point faults and ensures the continuity of critical control tasks in industrial production.
    • Comprehensive and Non – Interfering Fault Detection
      • The voltage and current loopback circuits cooperate with online diagnostic technology to comprehensively detect various field faults. It can identify problems such as power loss, blown fuses, open or missing loads, and field shorts. The whole detection process does not interfere with the normal output of signals, providing all – round protection for system operation.
    • Hot – Swap Supports Uninterrupted Production
      • The module supports hot – swap operation. Maintenance personnel can plug and replace the module directly during the operation of the industrial system without shutting down the entire production line. This function greatly shortens the maintenance time and minimizes the economic loss caused by production interruption due to equipment failure.
    • Intuitive Status Monitoring for Easy Maintenance
      • The rich diagnostic indicators allow operation and maintenance personnel to quickly grasp the working status of the module and each output point through the light on and off status. This intuitive display method helps to quickly locate fault points, simplify the troubleshooting process, and reduce the difficulty and cost of daily operation and maintenance of the module.
  • Application Scenarios
    • Oil and Gas Industry
      • In offshore drilling platforms and onshore oil transmission stations, the module is integrated into emergency shutdown systems and pipeline control systems. It drives the action of emergency cut – off valves and compressor control components. When abnormal pressure or gas leakage is detected, it can immediately output signals to cut off the oil and gas transmission path and stop the operation of relevant equipment to avoid explosion and fire accidents.
      • In natural gas processing plants, it controls the switching of separation tower discharge valves and purification equipment. When the purity of processed natural gas does not meet the standard, it can quickly adjust the relevant valves to ensure the stability of the processing process and product quality.
    • Chemical and Power Industry
      • In chemical plants producing flammable and corrosive materials, it is applied to reactor interlock systems and material feeding control systems. It drives the feeding valves and agitator motors of the reactor. When the reaction temperature or pressure exceeds the set range, it can immediately cut off the material supply and stop the agitator to prevent dangerous reactions such as chemical leakage and explosion.
      • In thermal power and nuclear power plants, it is used in boiler safety protection systems and steam turbine control systems. It controls the opening and closing of safety valves and fuel control valves. When the boiler pressure is too high or the turbine has abnormal operation parameters, it can quickly trigger pressure relief or fuel cut – off actions to protect core power generation equipment.
    • Water Treatment and Pharmaceutical Industry
      • In large – scale water treatment plants, the module controls the operation of dosing pumps, intake and drainage valves. It adjusts the start – stop of relevant equipment according to the water quality detection signal to ensure that the water purification process meets the standard and stabilize the water supply quality.
      • In pharmaceutical production workshops with strict process requirements, it is integrated into the production safety control system. It drives the switching components of material transmission pipelines and the control switches of reaction equipment. When the process parameters such as temperature and pH value of the pharmaceutical reaction deviate, it can immediately cut off the material transmission to ensure the safety and qualification of pharmaceutical products.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Triconex 3623T 16-Point Triple Modular Redundancy Supervised Digital Output Module”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

TRIC0NEX 3481

Technical Specifications:

  • It is designed for high availability and fault tolerance, ensuring continuous operation even in the event of hardware failures.
  • The system supports safety integrity levels up to SIL 3 according to IEC 61508, making it suitable for critical safety applications.
  • It operates with a triple modular redundant (TMR) architecture where three independent systems process data simultaneously and compare results to ensure accuracy and reliability.
Read more
Quick view

Triconex 3009 Enhanced Main Processor (UMP) Module

Technical Specifications
  • Processor and Memory Parameters
    • It is equipped with an Intel Core i7 - 4790 or PowerPC 604e processor, with a main frequency of up to 1.3 GHz, which can efficiently support the operation of complex control algorithms and large - scale system data processing.
    • It supports a maximum of 16GB DDR3L RAM, and is configured with a 2GB SSD for storage, which can stably store a large number of control programs, configuration parameters and real-time operation data of the system.
  • Power and Environmental Parameters
    • The input voltage is 24V DC, the output voltage is 5V DC, and the maximum power consumption is 22W, which meets the power supply standards of industrial control systems.
    • The operating temperature range is -40°C to +70°C, and the storage temperature range is -40°C to +85°C. It can adapt to the extreme temperature changes of most industrial sites.
    • It can work normally in an environment with a humidity of 5% to 95% non-condensing, has an anti - shock capacity of 30g (11ms) and an anti - vibration capacity of 5g (10 - 150Hz).
Read more
Quick view

Triconex 3101 Tricon Main Processor Module

Technical Specifications
    • Processor and Memory Parameters
      • It is equipped with a 32-bit Motorola MPC860 processor running at a clock speed of 50 MHz, which efficiently supports the operation of complex control logic.
      • It is configured with 6MB Flash PROM for stable storage of application programs, 16MB DRAM for running programs and storing sequence of events data, and 8KB NVRAM dedicated to maintaining variables.
    • I/O and Power Parameters
      • It is equipped with 8 digital input channels, 8 digital output channels, 4 analog input channels, and 4 analog output channels. It supports input types such as dry contacts, photoelectric signals and analog signals, and output types including relays and transistors.
      • The digital output current reaches 500mA, the typical input voltage is 24V DC, and some models can support 5V DC input. The module has a rated power of 12W.
Read more
Quick view

Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module

  • Technical Specifications
    • Electrical and Signal Parameters
      • It is equipped with 16 non-commoned independent output channels, with a nominal output voltage of 24 VDC and a voltage adaptation range of 22 - 45 VDC.
      • Each channel can carry a current of 2A, and the signal response time is less than 1ms, enabling rapid execution of control commands.
      • It adopts optical isolation technology, with a point-to-point isolation voltage of 1500 VDC, which can effectively prevent electrical interference between channels and external circuits.
    • Physical and Weight Parameters
      • Its dimensions are 49cm × 45.3cm × 6.8cm, and it is designed for 19-inch rack mounting, which is consistent with standard industrial control cabinet installation specifications.
      • The weight of the module is 3.65 kg, and its solid structure ensures stability during long-term operation.
    • Environmental Parameters
      • The operating temperature range is -40°C to 85°C, which allows it to adapt to the extreme temperature fluctuations of various outdoor and indoor industrial sites.
      • It can work normally in an environment with a relative humidity of 0% - 95% (non-condensing), resisting the impact of humid air on internal components.
Read more
Quick view

Triconex 3625 32-Point Triple Modular Redundancy Supervised

Technical Specifications
  • Electrical Parameters
    • It provides 32 commoned output channels with a nominal voltage of 24 VDC and a voltage adaptation range of 16 - 32 VDC, and can withstand a maximum voltage of 36 VDC.
    • Each output point has a maximum current of 1.7 A, a surge current of 7 A within 10 milliseconds, a minimum required load current of 10 mA, and a maximum load leakage current of 4 mA.
    • The typical voltage drop is less than 2.8 VDC at 1.7 A, the power module load is less than 13 watts, and the point isolation voltage reaches 1500 VDC to avoid electrical interference between circuits.
  • Physical Parameters
    • The module weighs 0.8 kg and has dimensions of 16cm × 16cm × 12cm, featuring a compact and lightweight design that facilitates installation in various industrial control cabinets.
    • It adopts an IP20-rated enclosure and is equipped with dedicated LED indicators for each output point to show on/off states, as well as module status indicators for pass, fault, load, and active conditions.
Read more
Quick view

Triconex 3625C1 32-Point Triple Modular Redundancy Digital Output Module

Technical Specifications
  • Electrical Parameters
    • It is configured with 32 commoned digital output channels, the nominal output voltage is 24 VDC, and the adaptive voltage range is 16 - 32 VDC, with a maximum withstand voltage of 36 VDC.
    • Each output channel can provide a maximum current of 1.7 A, the overall power consumption of the module is less than 13 watts, and some data shows that its output power can reach 15 watts.
    • It adopts a dual-power design, which further improves the stability of power supply and avoids system operation interruption caused by single power failure.
  • Processing and Memory Parameters
    • It is equipped with a dual-core PowerPC processor with a clock frequency of 800 MHz, which can efficiently support complex control algorithms and logic operations.
    • The module provides a memory range of 1 GB - 8 GB, which can store a large number of control logic programs and real-time operating data to meet the needs of complex industrial control scenarios.
Read more
Quick view

Triconex 4355X

Technical Specifications
  • Architecture: Triple Modular Redundancy (TMR) for fault tolerance.
  • Processor: High-performance CPU with sufficient memory for complex control tasks.
  • Communication Protocols:
    • Modbus (RTU/TCP) for integration with PLCs and SCADA systems.
    • Profibus DP for real-time control of sensors and actuators in factory automation.
    • Ethernet for high-speed data exchange and remote monitoring.
  • Input/Output (I/O):
    • Digital Inputs/Outputs: 16 isolated digital inputs and 8 relay outputs (potential-free contacts).
    • Analog Support: Optional integration with analog modules for temperature, pressure, and flow monitoring.
Read more
Quick view

TRICONEX 8310 High-Density Power Module

Technical Specifications

  • Processor: Equipped with triple modular redundancy (TMR) architecture for enhanced reliability and fault tolerance
  • Communication Interfaces: Supports multiple communication protocols such as Modbus, Ethernet, and proprietary Triconex protocols for integration with different systems
  • Memory: Sufficient onboard memory for storing application programs and data, ensuring reliable operation without data loss
  • Power Supply: Operates on standard industrial power supplies, typically 24V DC or 110/230V AC depending on configuration
  • Operating Temperature: Designed for stable operation within industrial environments, generally from -20°C to +60°C
Read more
Quick view