ProSoft 5601-RIO-MCM Remote I/O to Modbus Master - Image 1
ProSoft 5601-RIO-MCM Remote I/O to Modbus Master - Image 2
ProSoft 5601-RIO-MCM Remote I/O to Modbus Master - Image 3
Click to enlarge
ProSoft 5601-RIO-MCM Remote I/O to Modbus Master
ProSoft 5601-RIO-MCM Remote I/O to Modbus Master - Image 2
ProSoft 5601-RIO-MCM Remote I/O to Modbus Master - Image 3
MTL 5532 Single-Channel Pulse Isolator with Analog and Relay Alarm Outputs
MTL 5532 Single-Channel Pulse Isolator with Analog and Relay Alarm Outputs
Back to products
ProSoft AN-X2-AB-DHRIO EtherNet
ProSoft AN-X2-AB-DHRIO EtherNet

ProSoft 5601-RIO-MCM Remote I/O to Modbus Master

  • Technical Specifications
    • Electrical Parameters
      • The power supply voltage ranges from 18VDC to 32VDC, with a maximum current load of 500mA at 32VDC.
      • It adopts a passive power design that draws power directly from the connected Remote I/O scanner, eliminating the need for an independent external power supply and simplifying the wiring layout.
    • Communication Parameters
      • It supports Remote I/O, Modbus RTU and Modbus TCP protocols. The Modbus serial ports support baud rates ranging from 110 baud to 115k baud, with configurable stop bits of 1 or 2, data sizes of 7 or 8 bits, and parity options including none, even and odd.
      • The Remote I/O interface supports baud rates of 57.6k, 115k and 230k, and can realize block data transmission with the scanner, supporting BTR commands up to 63 words and BTW commands up to 64 words.
    • Environmental and Physical Parameters
      • The operating temperature ranges from -40°C to 85°C, and the storage temperature ranges from -40°C to 85°C. It can adapt to extreme temperature changes in both indoor and outdoor industrial sites.
      • The relative humidity tolerance is 5% to 95% non-condensing. Its dimensions are 222.25mm x 88.90mm x 38.10mm and it weighs 0.72kg.
Category:
Description
  • Functional Features
    • Dual Configuration Modes for Flexible Adaptation
      • It can be freely configured as a Modbus master or slave. As a master, it actively sends Modbus commands to other nodes on the network and optimizes polling strategies for slave devices with communication problems by reducing their polling frequency. As a slave, it allows remote masters to access all data in the module, which adapts to different Modbus network architecture requirements.
      • It supports up to 255 Modbus slave devices, and each Modbus serial port can be configured independently, which provides great flexibility for the expansion of industrial control systems.
    • Comprehensive Modbus Function Code Support
      • It supports multiple Modbus function codes, including reading coil status, reading input status, reading holding registers, reading input registers, forcing single coils, presetting single holding registers, forcing multiple coils and presetting multiple holding registers. These comprehensive function code supports cover most data reading and writing requirements in industrial control processes.
    • Reliable Fault Monitoring and Status Feedback
      • It is equipped with dedicated LED indicators that show power and hardware fault status, gateway communication activity, and serial port activity and error conditions respectively. The independent status display for each function enables maintenance personnel to quickly locate faults and shorten troubleshooting time.
    • Efficient Data Processing and Compatibility
      • It supports high-speed data transmission through input and output images, and can directly access related data files to achieve faster data throughput. It is highly compatible with Rockwell PLCs and various Modbus-equipped sensors, meters and controllers, which avoids compatibility issues during system integration.
  • Application Scenarios
    • Manufacturing Factories
      • In automated production lines such as automobile assembly and electronic component processing, it connects Rockwell Automation Remote I/O-equipped assembly robots, conveyor belts and other equipment with Modbus-based temperature sensors and pressure transmitters. It realizes real-time transmission of equipment operation status data and environmental detection data to the central control system, ensuring the stable operation of the production line.
    • Oil and Gas Industry
      • In onshore oil fields and offshore drilling platforms, it integrates Rockwell Remote I/O-based pipeline control valves with Modbus SCADA systems. It transmits data such as pipeline pressure and oil flow to the monitoring center in a timely manner, and the stable communication performance ensures that the staff can grasp the operation status of the pipeline network and issue control instructions promptly.
    • Power Industry
      • In thermal power plants and hydropower stations, it connects Remote I/O modules on generators, transformers and other key equipment to Modbus intelligent electric meters and protective relays. It achieves unified collection and analysis of equipment operating parameters and power consumption data, which lays a foundation for the efficient scheduling and safe operation of the power grid.
    • Food Processing Industry
      • In large food processing plants, it links Rockwell Remote I/O-controlled packaging machines and conveying systems with Modbus temperature and humidity controllers in cold storage and processing workshops. It ensures that the temperature and humidity data in the production environment are synchronized with the production equipment control system, which guarantees the quality and safety of food production.
    • Water Treatment Plants
      • It connects Remote I/O-equipped water pumps, valves and other execution equipment in water purification and sewage treatment processes with Modbus-based water quality detectors and liquid level transmitters. It realizes the linkage between water quality data monitoring and equipment operation control, improving the automation level and treatment efficiency of the water treatment process.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ProSoft 5601-RIO-MCM Remote I/O to Modbus Master”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

ProSoft 5302-MBP-MCM4MB

Technical Specifications
  • Ports:
    • 1x Modbus Plus port (DB9 female connector, fully configurable for master/slave operation).
    • 4x Modbus serial ports (RS-232/RS-485, each independently configurable for master/slave roles).
  • Protocol Support:
    • Modbus Plus: Supports master and slave implementations.
    • Modbus RTU/ASCII: Supports master and slave modes on all serial ports.
  • Mechanical Design:
    • DIN-rail mounting for compact installation in control cabinets.
    • Dimensions: 21 × 54 × 32 mm (standard industrial form factor).
Read more
Quick view

ProSoft 6104-WA-PDPM Wireless PROFIBUS DP Gateway Master Module

Technical Specifications
  • Wireless Communication Parameters
    • It operates in the 2.4 GHz frequency band ranging from 2400 MHz to 2483.5 MHz and complies with the IEEE 802.11 b wireless standard.
    • The wireless data rate can reach up to 11 Mbps, with an output power of 32 mW (15 dBm) and a maximum open-air transmission distance of 400 meters.
    • It is equipped with two RP-SMA connectors that support antenna diversity, which enhances the stability of wireless signal reception and transmission.
  • PROFIBUS DP Related Parameters
    • It is equipped with an RS-485 PROFIBUS DP interface and supports PROFIBUS DP and DP-V1 protocols.
    • The communication baud rate of PROFIBUS DP ranges from 9.6 kbps to 12 Mbps, and it can support up to 125 PROFIBUS DP slave devices.
  • Power and Mechanical Parameters
    • It has a power supply requirement of 10 - 36 VDC, adapting to different industrial power supply environments.
    • It adopts a DIN rail mounting design with an IP20 protection rating, which fits the standard installation specifications of industrial control cabinets and prevents dust intrusion effectively.
Read more
Quick view

ProSoft AN-X2-AB-DHRIO EtherNet

  • Technical Specifications
    • Power Supply Parameters
      • The typical power consumption is 200mA at 12V DC or 100mA at 24V DC, with a maximum power consumption of 2.4W. It adapts to the common low - voltage DC power supply environment in industrial sites and has low overall energy consumption.
    • Communication Parameters
      • It is equipped with one RJ45 10/100 Mbps Ethernet port and one DH+/Remote I/O port. It supports DH+, Remote I/O and EtherNet/IP protocols and now supports DH+ migrations on SLC networks.
      • It supports all DH+ and Remote I/O baud rates, which are 57.6k baud, 115.2k baud and 230.4k baud, and Remote I/O addressing ranges from 0 to 76 octal.
    • Environmental and Physical Parameters
      • The operating temperature ranges from 0°C to 50°C, and the storage temperature ranges from -40°C to 85°C. It can withstand extreme temperature changes in both indoor and outdoor industrial environments.
      • The relative humidity tolerance is 5% to 95% non - condensing. Its dimensions are 107mm x 126mm x 34mm excluding connectors, and it weighs approximately 310 grams. It supports DIN rail mounting for convenient integration into industrial control cabinets.
Read more
Quick view

ProSoft MVI56-PDPS PROFIBUS DP Slave Communication Module for ControlLogix

Technical Specifications
  • Mechanical and Power Parameters
    • It adopts a single-slot design compatible with the ControlLogix 1756 backplane, supporting installation in both local and remote ControlLogix racks.
    • The power consumption parameters match ControlLogix chassis requirements: 5 VDC backplane current draw is 800 mA, and 24 VDC current draw is 3 mA, ensuring stable operation without overloading the chassis power supply.
  • PROFIBUS DP Communication Parameters
    • It complies with PROFIBUS DP V0 and V1 standards, supporting baud rates ranging from 9.6 kbps to 12 Mbps for flexible network configuration.
    • The module supports up to 244 bytes of input data and 244 bytes of output data for cyclic communication. For acyclic communication, it supports PROFIBUS DP V1 services, including parameterization, diagnosis and alarm handling.
    • It is equipped with a standard DB9 male PROFIBUS DP connector, compatible with standard PROFIBUS DP cables and connectors, and supports PROFIBUS DP slave addressing from 0 to 125.
Read more
Quick view

ProSoft MVI94-GSC Flex I/O Generic Serial Communication Module

  • Technical Specifications
    • Mechanical and Power Parameters
      • It adopts DIN rail installation mode, with dimensions of 120mm x 80mm x 40mm and a weight of about 200g, featuring a compact structure that saves installation space.
      • The power supply range is 9 - 30V DC, meeting the power demand of most industrial on-site power supply systems, and its enclosure protection level reaches IP20.
      • The operating temperature range is -40°C to 85°C, which enables it to operate stably in extreme temperature environments such as cold workshops and high-temperature industrial sites.
    • Communication Parameters
      • It supports multiple communication protocols including RS-232, RS-422, RS-485, ASCII, Modbus RTU and Modbus TCP/IP, covering most serial communication needs in industrial fields.
      • The maximum baud rate can reach 115.2 kbps, and it supports flexible configuration of parameters such as data bits and stop bits to match different serial device communication requirements.
      • It is equipped with a single-slot interface that supports ASCII communication, and is built with a 4096-character data buffer to ensure the stability of data transmission and avoid data loss due to transmission delays.
    • Compatibility Parameters
      • It is fully compatible with Allen-Bradley ControlLogix and CompactLogix series PLCs, and can be perfectly integrated into the corresponding control system architectures.
      • It is compatible with various serial industrial devices such as bar code readers, scales, terminals and printers, without requiring additional adaptation accessories during connection.
Read more
Quick view

ProSoft PLX31-EIP-SIE EtherNet/IP to Siemens Industrial Ethernet Gateway

Core Function

  • Protocol Conversion: Bridges EtherNet/IP (CIP, PCCC) and Siemens Industrial Ethernet protocols for seamless interoperability between Rockwell controllers and Siemens PACs .
  • Data Exchange: Supports high-speed bidirectional transfers of up to 10,000 16-bit registers, ideal for large-scale industrial data synchronization .
Read more
Quick view

ProSoft PTQ-PDPMV1 PROFIBUS DPV1 Master Network Interface Module for Quantum Processors

Technical Specifications
  • Power and Physical Parameters
    • It uses a 24VDC power supply and has a power consumption of 1.5W, which is compatible with standard industrial power supply configurations.
    • Its dimensions are 110 mm × 95 mm × 50 mm and weighs 0.5 kg. The compact size allows for flexible installation in industrial control cabinets.
    • It operates within a temperature range of -40°C to 85°C and can withstand a humidity range of 5% to 95% without condensation, adapting to harsh industrial environmental conditions.
  • Communication Parameters
    • It serves as a PROFIBUS DPV1 master interface and supports baud rates ranging from 9600 bps to 12 Mbps, with automatic baud rate detection for all valid PROFIBUS DPV1 rates.
    • It can connect up to 125 slave devices when using repeaters, and can also connect PROFIBUS PA slaves to the network through DP/PA couplers or links.
    • It requires Ethernet connectivity for normal operation, and uses UDP messaging to back up data in status registers between modules to determine switchover conditions.
Read more
Quick view

ProSoft RLX2-IHNF-A 802.11abgn Fast Industrial Hotspot

  • Technical Specifications
    • Physical and Environmental Parameters
      • It adopts a die-cast aluminum-plastic housing and DIN rail mounting. Its dimensions are 14.8 cm × 11.8 cm × 3.8 cm, and it weighs 499 grams, which is compact and easy to install in control cabinets.
      • The operating temperature range is -40°C to 70°C, and it can withstand up to 100% relative humidity without condensation. It complies with IEC 60068 anti-shock and anti-vibration standards, resisting 20g three-axis shock and 5g vibration from 10Hz to 150Hz.
    • Power Parameters
      • It supports 10 - 24 VDC power supply and is compatible with the 802.3af PoE standard. It can be powered by a PoE injector, reducing wiring complexity.
      • Its power consumption is less than 8W for Series C and less than 9W for Series B, featuring low energy consumption and adapting to long-term continuous operation in industrial systems.
    • Communication Parameters
      • It supports multiple wireless standards such as 802.11a, 802.11g, 802.11n, 802.11h and 802.11i, and is equipped with 3 RP-SMA antenna connectors for MIMO technology.
      • The adjustable transmit power ranges from 17 dBm to 22 dBm, and the receiver sensitivity is as low as -92 dBm at low transmission rates, ensuring stable signal reception.
      • It is equipped with one 10/100/1000 Base-T shielded RJ45 Ethernet port and one RS232 DB9 female serial port, supporting direct communication conversion between Modbus TCP/IP and Modbus RTU.
Read more
Quick view